Capabilities

       Equipment
       • 670 ft Richard & Wilcox enclosed conveyor
       • Three-stage iron phosphate pre-treatment wash
       • 60 ft dry-off convection oven with air curtains
       • Black light inspection area
       • 28 ft x 30 ft climate controlled application room
       • Two-position manual spray booth
       • Nordsen Sure Coat electrostatic spray guns
         and controls
       • Nordsen stainless steel fluidizer hoppers
       • 80 ft two-pass convection cure oven
       • 10 ft x 12 ft batch oven
       • 26” x 26” x 48” sand blaster

         Capabilities
       • Line speed range of 2 – 20 feet per minute
       • 90 minute average turn time from load to
         unload
       • Equipment part openings are 36” x 50” and can
         accommodate a 14 ft length
       • Maximum part weight is 40lbs per foot
       • Can coat any ferrous and non-ferrous metals,
         mild-steel, tool steel, and aluminum
       • Can coat sheet steel, wire, tubing, extrusions,
         and weldments

         Powder Coatings
       • Epoxy – Decorative, indoor use
       • Polyester – Interior/exterior, good chemical and
         weather resistance
       • Epoxy/Polyester Hybrid – Decorative,
         functional, indoor use, chemical resistant
       • Polyurethane – Interior/exterior, low film
         thickness, good weather resistance
       • TGIC – Decorative, functional, thick film
         build
       • Hybrids – Specially formulated for unique
         needs
       • FDA approved – Hybrid use in food and
         drug industries
       • Anti-microbial – Prevents spread of
         microbes or bacteria
       • Thermoplastic – Alternative to vinyl
         dipping, applied at 3 mils
       • Thermosetting – Crosslinker additives
       • U.V. Resistant Super Durables – Outdoor
         equipment, impact & chemical resistant